FrostJet ™ Windsheild Washer Fluid Heater System
FrostJet ™ gives you Clear Road Vision in any Season plus increased Driving Safety for all Cars, Trucks, SUV's, RV's and Buses!
Your Vehicle's Windshield Washer Fuild will be Heated in seconds to over 120 Degrees F to enhance Removing Frost, Slush, Snow and Ice, plus its ideal for Cleaning Insects and Road Film from your Vehicle's Windshield.
Why Should you own a FrostJet
- Heats Vehicle's Windshield Washer Fluid to 120+ Degrees F.
- Reduces Day-time & Night-time Glare.
- Prevents Wiper Blade Freeze-up.
- Eliminates Ice & Snow Build-up on Windshields.
- Quickly Removes Windshield Road Salt and Mud Film.
- Reduces Interior Windshield Fogging.
- Improves Wiper Blade Performance.
- Extends Wiper Blade Life.
- Operates with Existing Washer System.
- Compact Design for Easily Installation.
- System Exhidit's Own Self Diagnostics.
- Built Micro Processor Monitors System Performance and Safety
FrostJet ™ is the only Aftermarket Windshield Heated Washer Fluid System that Dramatically Improves Safe Driving in all Weather Conditions, and is Safe for All Windshield Fluid Types.
FULLY AUTOMATIC
- Automatically powers on when engine operates (and system voltage
is greater than 13.2 volts); remains activated until the engine is shut off
- Automatically goes to high heat when windshield washers are used, modulates to low power when the
wash cycle is completed.
EFFICIENT
- The hot fluid efficiently removes bug/wax, grime, ice and snow from windshield
- Provides clean, non-streak windshield for clear vision and safe driving in any weather.
- Improves Night Visibility and improves over all driving safety
SPECIAL FEATURES
- 150 ml heated fluid makes it the only product capable of cleaning large windows (bus, truck
emergency vehicles) in any weather
- Fluid is dispensed through existing nozzle system or wiper blades,
- Conveniently operates through existing wiper controls
- Simple installation: 3 wires, 2 tube clamps, 2 screws
- Does not operate prior to, or during, engine start-up. Operates only after the motor is running and no
battery draining is occurring
- Proprietary micro-computer slowly ramps-up power and slowly ramps power-down to eliminate
power variations
- Dual heating system provides immediate (10 seconds) heating, followed by a second heating cycle for
the full 150 ml of fluid
- Operates at all vehicle angles – inclines, hills and level ground
- System diagnostics
Installation
The FrostJet ™ Installs into any vehicle with a 12V Charging System, Typical Installation time is less then 30 Minutes,
Installation Steps
- Lift Hood of Vehice
- Locate Existing Washer Fluid Reservoir
- Locate Existing Washer Fluid Hose's (Closer to the Jets the better)
- Locate a Suitable Location to install the FrostJet Reservoir
- Install the FrostJet ™ Reservoir with provided Mounting Hardware
- Cut the Existing Vehicle's Washer Fluid hose
- Install the Supplied Joint Fitting to both Sides of the vehicles Washer fluid hose and connect to the FrostJet ™ Reservoir to both sides
- Connect the FrostJet ™ to the Vehicles Battery
- Start Vehicle and Try it out.
