RingMagnets

If you haven't already seen the video demonstration, showing how the MagMover system allows suspension without a ladder, click here now to view it, then return.

RingMagnets are the heart of the MagMover system. As the name suggests, they are small powerful magnets with rings. Their plastic coating prevents ceiling scratches, while the balanced center ring allows both maximum pull on the magnet and proper placement on a MagMover for easy installation and removal.

Choose the right size for your project:

Regular RingMagnets
1 3/4" x 1/2" x 3/5" (4.4 cm x 1.3 cm x 1.5 cm)
--- 20/bag Item #94288
Regular RingMagnets will hold up to 5 lbs.* (2 kg*). The original magnets, they are suitable for hanging a wide variety of mid-weight signs, products and decorations.

Super RingMagnets
2 3/10" x 4/5" x 3/5" (5.8 cm x 2.0 cm x 1.5 cm)
--- 10/bag Item #95270
Super RingMagnets are extra strong magnets supporting up to 10 lbs.* (4 kg*) each. Designed for hanging signs, fabric and larger items, they now feature double rings. The upper ring fits securely on the MagMover post. The larger bottom ring allows thicker tether lines to be used, and makes removal from the ceiling easier.

*Note: Actual magnet strength depends on the type and surface treatment of the ceiling metal. If the ceiling is rough or covered with layers of paint, the magnetic attraction will be reduced (it's always a good idea to test the surface in advance).

WARNING: Keep all magnets away from credit cards, video tapes, computers and other electronic devices!

Single MagMover™
Item #94290
3" x 3" (7.5 cm x 7.5 cm)
MagMovers come in three sizes: Single, Dual and Multi. All three screw onto a MagPole or a standard North American threaded pole – like a broom handle or painting extension pole.

The inexpensive Single MagMover allows for positioning of one RingMagnet at a time. As seen on the home page animation, it's ideal for items requiring only a single suspension point, like an air-filled foil balloon that rotates with room air currents. When it's time to remove the item, the MagMover takedown corkscrew hooks the magnet ring and brings it safely down.

NEW! The new Single MagMover allows RingMagnets to be placed so displays can be suspended from walls as well as ceilings!

To better understand how the Single MagMover is used in a step-by-step project, see Inflate & Hang a Foil Balloon.

Dual MagMover™
Item #10402
3.5" x 7" (8.5 cm x 18 cm)
The Dual MagMover holds up to two RingMagnets at a time, so it's designed for items requiring two or fewer suspension points. Perfect for hanging most signs, art work, POP displays, retail merchandise and balloon sculptures.

To suspend an item, place one magnet on each post, ensuring the suspension lines are kept on the same side. Angle the Dual MagMover so only one magnet is aligned with the metal surface on the ceiling and allow it to adhere. Then walk to the second suspension point position, align the second magnet and repeat.
To remove the item, extend the takedown screws and capture one magnet with each screw. For step-by-step photos of the Dual MagMover in use, see the Hang A Sign project.

Multi MagMover™
Item #10406
3.5" x 16" (8 cm x 41 cm)
The Multi MagMover can do everything the Single and Dual versions allow, but holding up to six RingMagnets at a time, it will also suspend items requiring multiple suspension points. Ideal for hanging large signs, long banners and retail displays, chain lights, tinsel garland, tulle swags, fabric bunting, air-filled balloon garlands (see photo below)... and MUCH more.



Suspension and takedown are done in the same manner as with the Dual MagMover – angling the tool so only one RingMagnet is accessed at a time. The Multi MagMover also features a takedown hook (shown at the far left in the product photo above). This simple hook can speed removal of non-fragile items, by allowing the magnet to fall rather than being captured on a takedown screw.

See the Suspend Garland project for photos of this phenomenal product at work.

--- Back to Top ---