Montag Equipment
Sealed Tank
Tank is sealed to maintain air pressure between bins for greater row to row accuracy. Simple yet rugged designed tank & lid seal, using automotive rubber gasket.
High quality injection molded HDPE plastic augers
Very accurate metering with large rate range (25lbs. – 500lbs. per tank). See capacity chart for details. No need to change metering drive for full rate range – unlike other competing brands.
Food Grade Stainless Steel and Poly Construction
Long life, cleans up easy
Single Hydraulic Input Requirement
Reduces hydraulic requirements allowing for more options for grower
The 2208 has two options for PWM Hydraulic Block, a Single or a Dual product.
The Montag specific hydraulic block allows for industry leading control of the product metering system and the fan with only one hydraulic bank required. The block includes safety valves to protect the fan seals and reduces heat in the hydraulic system.
Tank Ladder access
Safe entry and exit. Easy access for clean out.
Improved Montag Fluid Bed – 2208 Air Delivery System
2208 air system is streamlined to improve aerodynamics and reduce horsepower requirements Fertilizer is introduced into the air stream at the air chamber requiring less pressure to move it to the row unit
Components are corrosion resistant
Any component that comes in direct contact with fertilizer is either stainless steel or plastic. Components outside the tank (such as Valves / Weigh bars / Elec. Harnessing) are all selected with our corrosive environment in mind for in field reliability.
Up to 4 section configurations
Sections can be added to the 2208 system at any time – giving you added flexibility. -Sections are controlled with hydraulic motors and PWM valves for infield reliability.
Configurable Rows
Rows can be added and subtracted to fit your farming operation’s needs.
Tank Design
-Functional yet streamlined in its design. -Integrated twist-lock lid.
Screen Design
Screens are integrated into the tank to removes large materials when loading that can plug down tubes or can harm metering system. -One ¾” screen per tank is provided.
Metering Discharge Outlets
Outlets can be turned to blow either forward or backwards by turning the air chamber pan, this allows the grower to choose the direction the fan and outlets are positioned depending on the application needed.
2208 at the 2019 Farm Progress Show
Watch Brian Johnson, Sales manager for Montag Manufacturing, talk about the Gen II 2208 at the 2019 Farm Progress show.
High quality injection molded HDPE plastic augers
Very accurate metering with large rate range (25lbs. – 500lbs. per tank). See capacity chart for details. No need to change metering drive for full rate range – unlike other competing brands.
Food Grade Stainless Steel Trough and Poly Tank Construction
Long life, cleans up easy
Single Hydraulic Input requirement
Reduces hydraulic requirements allowing for more options for grower
PWM Hydraulic Block Standard
The Montag specific hydraulic block allows for industry leading control of the product metering system and the fan with only one hydraulic bank required. The block includes safety valves to protect the fan seals and reduces heat in the hydraulic system.
Sealed Tank
Tank is sealed to maintain air pressure between bins for greater row to row accuracy. -Simple yet rugged designed tank & lid seal, using automotive rubber gasket.
ISOBUS Rate Controller
Specifically developed to operate GEN II system with full functionality. Compatible with most of the industries displays – Contact Montag representative for more information.
ISOBUS Scale
GEN II’s come standard with each tank being mounted to the frame with an ISOBUS scale. ISOBUS scales are integrated into the GEN II Montag rate controller.
Tank Ladder Access
The rear deck can be configured for the ladder to be mounted for a left or a right-hand entrance. -Additionally, ladder can be ordered with a rear access.
Improved Montag Fluid Bed – GEN II Air Delivery System
GEN II air system is streamlined to improve aerodynamics and reduce horsepower requirements. -Fertilizer is introduced into the air stream at the air chamber, requiring less pressure to move it to the row unit.
Components are corrosion resistant
Any component that comes in direct contact with fertilizer is either stainless steel or plastic. -Components outside the tank (such as Valves / Weigh bars / Elec. Harnessing) are all selected with our corrosive environment in mind for in-field reliability.
Up to 4 section configurations
Sections can be added to the GEN II system at any time – giving you added flexibility. Sections are controlled with hydraulic motors and PWM valves for infield reliability.
Configurable Rows
Rows can be added and subtracted to fit your farming operations needs.
Tank Design
The GEN II comes with two 4.5-ton (US) tanks with a built-in walk way that divides the tanks and built-in steps for accessing the inside of the tank.
Screen Design
Screens are positioned with a 7-degree angle to help fully fill the tank by driving the fertilizer to the outside of the tank when filling. -2018 GEN II’s and newer will include a full set of (2) ½” screens and (4) ¾” screens. -Removes large materials when loading that can plug down tubes or can harm metering system.
GEN II Product Release
Watch Roger Montag, Presedent of Montag Manufacturing, talk about the Gen II
High quality injection molded HDPE plastic augers
Very accurate metering with large rate range (25lbs. – 500lbs. per tank). See capacity chart for details. No need to change metering drive for full rate range – unlike other competing brands.
Food Grade Stainless Steel Trough and Poly Tank Construction
Long life, cleans up easy
Single Hydraulic Input requirement
Reduces hydraulic requirements allowing for more options for grower
PWM Block with fan protection
The Montag specific hydraulic block allows for industry leading control of the product metering system and the fan with only one hydraulic SCV required. The block includes safety valves to protect the fan seals and reduces heat in the hydraulic system.
Sealed Tank
Tank is sealed to maintain air pressure between bins for greater row to row accuracy. -Simple yet rugged designed tank & lid seal, using automotive rubber gasket.
Tank Ladder Access
The rear deck can be configured for the ladder to be mounted for a left or a right-hand entrance. -Additionally, ladder can be ordered with a rear access.
Improved Montag Fluid Bed – 2108 Air Delivery System
2108 air system is streamlined to improve aerodynamics and reduce horsepower requirements. Fertilizer is introduced into the air stream at the air chamber requiring less pressure to move it to the row unit.
Components are corrosion resistant
Any component that comes in direct contact with fertilizer is either stainless steel or plastic. -Components outside the tank (such as Valves / Weigh bars / Elec. Harnessing) are all selected with our corrosive environment in mind for in-field reliability.
Up to 4 section configurations
Sections can be added to the GEN II system at any time – giving you added flexibility. Sections are controlled with hydraulic motors and PWM valves for infield reliability.
Configurable Rows
Rows can be added and subtracted to fit your farming operations needs.
Tank Design
The GEN II comes with two 4.5-ton (US) tanks with a built-in walk way that divides the tanks and built-in steps for accessing the inside of the tank.
Screen Design
Screens are positioned with a 7-degree angle to help fully fill the tank by driving the fertilizer to the outside of the tank when filling. -2018 GEN II’s and newer will include a full set of (2) ½” screens and (4) ¾” screens. -Removes large materials when loading that can plug down tubes or can harm metering system.
Metering Discharge Outlets
Outlets can be turned to blow either forward or backwards by turning the air chamber pan, this allows the grower to choose the direction the fan and outlets are positioned depending on the application needed.
Crary Fan
Industry standard for quality, high performance with low hydraulic requirements.
Dwyer Air Gauge
Accurate fan pressure reading with magnetic mount.
Mechanical slide gate control
Allows user to segregate the product from the metering augers, easier cleanout, maintenance or when roading.
3-year Warranty
High quality, for customer satisfaction and confidence.
Lets Get in Touch!
Let us know how we can help make your operation as successful as possible.